v2

README.md

@@ -4,12 +4,12 @@ A Domoticz plugin to manage Tuya Smart Plug
 
 ## ONLY TESTED FOR Raspberry Pi
 
-With Python version 3.5 & Domoticz version 4.9700 (stable) and 4.9999 (beta)
+With Python version 3.5 & Domoticz version 4.9999 (beta)
 
 ## Prerequisites
 
 This plugin is based on the latest pytuya Python library. For the installation of this library,
-follow the Installation guide below since pip will not install the latest version commited few days ago.
+follow the Installation guide below.
 See [`https://github.com/clach04/python-tuya/`](https://github.com/clach04/python-tuya/) for more information.
 
 For the pytuya Python library, you need pycrypto. pycrypto can be installed with pip:
@@ -68,11 +68,8 @@ sudo /etc/init.d/domoticz.sh restart
 | **IP address** | IP of the Smart Plug eg. 192.168.1.231 |
 | **DevID** | devID of the Smart Plug |
 | **Local Key** | Local Key of the Smart Plug |
-| **Replay** | default is Yes |
 | **Debug** | default is False |
 
-Replay indicates that a command (on/off) will be replay in case of failure except when the Smart Plug is not connected.
-
 ## DevID & Local Key Extraction
 
 All the information can be found here:
@@ -80,5 +77,5 @@ All the information can be found here:
 
 ## Acknowledgements
 
-  * Special thanks for all the hard work of [codetheweb](https://github.com/codetheweb/), [clach04](https://github.com/clach04), [blackrozes](https://github.com/blackrozes), [jepsonrob](https://github.com/jepsonrob), and all the other contributers on [tuyapi](https://github.com/codetheweb/tuyapi) and [python-tuya](https://github.com/clach04/python-tuya) who have made communicating to Tuya devices possible with open source code.
+  * Special thanks for all the hard work of [clach04](https://github.com/clach04), [codetheweb](https://github.com/codetheweb/) and all the other contributers on [python-tuya](https://github.com/clach04/python-tuya) and [tuyapi](https://github.com/codetheweb/tuyapi) who have made communicating to Tuya devices possible with open source code.
 * Domoticz team

plugin.py

@@ -26,17 +26,11 @@
 ########################################################################################
 
 """
-<plugin key="tixi_tuya_smartplug_plugin" name="Tuya SmartPlug" author="tixi" version="1.0.0" externallink=" https://github.com/tixi/Domoticz-Tuya-SmartPlug-Plugin">
+<plugin key="tixi_tuya_smartplug_plugin" name="Tuya SmartPlug" author="tixi" version="2.0.0" externallink=" https://github.com/tixi/Domoticz-Tuya-SmartPlug-Plugin">
 	<params>
 		<param field="Address" label="IP address" width="200px" required="true"/>
 		<param field="Mode1" label="DevID" width="200px" required="true"/>
 		<param field="Mode2" label="Local Key" width="200px" required="true"/>
-		<param field="Mode3" label="Replay" width="75px">
-			<options>
-				<option label="Yes" value="Yes" default="true"/>
-				<option label="No" value="No" />
-			</options>
-		</param>
 		<param field="Mode6" label="Debug" width="75px">
 			<options>
 				<option label="True" value="Debug"/>
@@ -48,75 +42,32 @@
 """
 
 import Domoticz
-import socket #needed for socket.timeout exception
 import pytuya
+import json
 
 class BasePlugin:
 	
 	__UNIT                = 1
-	__MINUTE = 6 #heartbeat is called every 10 seconds and executed every 60 seconds
+	__HB_BASE_FREQ        = 2
 
 	def __init__(self):
 		self.__address    = None          		#ip address of the smartplug
 		self.__devID      = None          		#devID of the smartplug
 		self.__localKey   = None          		#localKey of the smartplug
 		self.__device     = None          		#pytuya object of the smartplug
-		self.__replay              = True          #replay mode
+		self.__runAgain   = self.__HB_BASE_FREQ	#heartbeat frequency (20 seconds)
-		self.__last_cmd_for_replay = None          #last command for replay (None/"On"/"Off")
+		self.__connection = None				#connection to the tuya plug
-		self.__runAgain            = self.__MINUTE #heartbeat frequency
+		self.__last_cmd	  = None          		#last command (None/"On"/"Off")
+		
 		return
 		
-	#check the current status (on/off) of the smartplug to update the device in Domoticz if needed
-	def check_status(self):
-		try:
-			data = self.__device.status()
-			if(data['dps']['1']):
-				UpdateDevice(self.__UNIT, 1, "On")
-			else:
-				UpdateDevice(self.__UNIT, 0, "Off")
-		except (ConnectionRefusedError, ConnectionResetError):
-			Domoticz.Log("A problem occurs while connecting to the Smart Plug")
-			Domoticz.Debug("Check if the Tuya app is closed on your smartphone")
-			#if you observe this message only few times in debug logs it works correctly
-			self.__runAgain = 0
-		except (socket.timeout, OSError):
-			Domoticz.Log("Smart Plug not reachable")
-			Domoticz.Debug("Check if the Smart Plug is connected to the same wifi network")
-
-	#execute a command
-	def exec_cmd(self,Command):
-		
-		if(self.__replay):
-			self.__last_cmd_for_replay=Command
-		try:
-			if (Command == 'On'):
-				self.__device.turn_on()
-				UpdateDevice(self.__UNIT, 1, "On")
-			else: #Command=='Off'
-				self.__device.turn_off()
-				UpdateDevice(self.__UNIT, 0, "Off")
-				
-			self.__last_cmd_for_replay = None #if no exception no need for replay
-			
-		except (ConnectionRefusedError, ConnectionResetError):
-			Domoticz.Log("A problem occurs while connecting to the Smart Plug")
-			Domoticz.Debug("Check if the Tuya app is closed on your smartphone")
-			#if you observe this message only few times in debug logs it works correctly (replay while fix it)
-			
-			if(self.__replay):
-				Domoticz.Debug("Command for replay: " + Command)
-			
-		except (socket.timeout, OSError):
-			Domoticz.Log("Smart Plug not reachable")
-			Domoticz.Debug("Check if the Smart Plug is connected to the same wifi network")
-			self.__last_cmd_for_replay = None #no replay if the smartplug is not connected
-
 	#onStart Domoticz function
 	def onStart(self):
-		Domoticz.Debug("onStart called")
+		
 		# Debug mode
-		if Parameters["Mode6"] == "Debug":
+		if(Parameters["Mode6"] == "Debug"):
 			Domoticz.Debugging(1)
+			Domoticz.Debug("onStart called")
 		else:
 			Domoticz.Debugging(0)
 			
@@ -125,39 +76,141 @@ class BasePlugin:
 		self.__devID    = Parameters["Mode1"]
 		self.__localKey = Parameters["Mode2"]
 			
-		if(Parameters["Mode3"]=="No"):
-			self.__replay=False
-			Domoticz.Log("Replay mode not activated")
-			
 		#initialize the defined device in Domoticz
 		if (len(Devices) == 0):
 			Domoticz.Device(Name="Tuya SmartPlug", Unit=self.__UNIT, TypeName="Switch").Create()
 			Domoticz.Log("Tuya SmartPlug Device created.")
 		
-		#create the pytuya object to communicate with the smartplug 
+		#create the pytuya object
 		self.__device = pytuya.OutletDevice(self.__devID, self.__address, self.__localKey)
 
-		#set the status
+		#start the connection
-		self.check_status()
+		self.__last_cmd = 'status'
+		self.__connection = Domoticz.Connection(Name="Tuya", Transport="TCP/IP", Address=self.__address, Port="6668")
+		self.__connection.Connect()
+
+	def onConnect(self, Connection, Status, Description):
+		if (Connection == self.__connection):
+			if (Status == 0):
+				Domoticz.Debug("Connected successfully to: "+Connection.Address+":"+Connection.Port)
+				if(self.__last_cmd != None):
+					self.__command_to_execute(self.__last_cmd)
+			else:
+				self.__connection.Disconnect()
+				self.__connection.Connect()
+				
+
+
+	def __extract_status(self, Data):
+		""" Returns a tuple (bool,bool) 
+			first:  set to True if an error occur and False otherwise
+			second: set to True if the device is on and to False if the device is off
+			
+			second is irrelevant if first is True 
+		"""
+		start=Data.find(b'{"devId')
+		
+		if(start==-1):
+			return (True,"")
+			
+		result = Data[start:] #in 2 steps to deal with the case where '}}' is present before {"devId'
+			
+		end=result.find(b'}}')
+		
+		if(end==-1):
+			return (True,"")
+		
+		end=end+2
+		result = result[:end]
+		if not isinstance(result, str):
+			result = result.decode()
+			
+		try:
+			result = json.loads(result)
+			return (False,result['dps']['1'])
+		except (JSONError, KeyError) as e:
+			return (True,"")
+
+	def onMessage(self, Connection, Data):
+		Domoticz.Debug("onMessage called: " + Connection.Address + ":" + Connection.Port +" "+ str(Data))
+		
+		if (Connection == self.__connection):
+			
+			if(self.__last_cmd == None):#skip nothing was waiting
+				return
+			
+			(error,is_on) = self.__extract_status(Data)
+			if(error):
+				self.__command_to_execute(self.__last_cmd)
+				return
+
+			if(self.__last_cmd == 'status'):
+				self.__last_cmd = None
+				
+			if(is_on):
+				UpdateDevice(self.__UNIT, 1, "On")
+				if(self.__last_cmd == 'On'):
+					self.__last_cmd = None						
+			else:
+				UpdateDevice(self.__UNIT, 0, "Off")
+				if(self.__last_cmd == 'Off'):
+					self.__last_cmd = None
+
+			if(self.__last_cmd != None):
+				self.__command_to_execute(self.__last_cmd)
+
+	def __command_to_execute(self,Command):
+		
+		if(Command == 'status'):
+			if(self.__last_cmd == None):
+				self.__last_cmd = Command
+		else:#On/Off
+			self.__last_cmd = Command
+		
+		if(self.__connection.Connected()):
+			if(Command == 'On'):
+				payload = self.__device.generate_payload('set', {'1':True})
+				self.__connection.Send(payload)
+				status_request = True
+			elif(Command == 'Off'):
+				payload = self.__device.generate_payload('set', {'1':False})
+				self.__connection.Send(payload)
+				status_request = True
+			elif(Command == 'status'):
+				status_request = True
+			else:
+				Domoticz.Error("Unknow Command received")
+				self.__last_cmd = None
+				status_request  = False
+		
+			if(status_request):
+				payload=self.__device.generate_payload('status')
+				self.__connection.Send(payload)
+		else:
+			self.__connection.Connect()
 
-	#onCommand Domoticz function
 	def onCommand(self, Unit, Command, Level, Hue):
-		Domoticz.Debug("onCommand called for Unit " + str(Unit) + ": Parameter '" + str(Command) + "', Level: " + str(Level))
+		Domoticz.Debug("onCommand called for Unit " + str(Unit) + ": Parameter '" + str(Command))
-		self.exec_cmd(Command)
+		self.__command_to_execute(Command)
+		
+
+	def onDisconnect(self, Connection):
+		Domoticz.Error("Disconnected from: "+Connection.Address+":"+Connection.Port)
+		#if (Connection == self.__connection):
+			#self.__connection.Connect()
 
-	#onHeartbeat Domoticz function							
 	def onHeartbeat(self):
-		Domoticz.Debug("onHeartbeat called")
-		
-		if(self.__last_cmd_for_replay != None):#replay
-			Domoticz.Debug("Replay: " + self.__last_cmd_for_replay)			
-			self.exec_cmd(self.__last_cmd_for_replay)
-
-		else:#normal case
 		self.__runAgain -= 1
-			if self.__runAgain == 0:
+		if(self.__runAgain == 0):
-				self.__runAgain = self.__MINUTE
+			self.__runAgain = self.__HB_BASE_FREQ				
-				self.check_status()
+			self.__command_to_execute('status')
+	
+	#onStop Domoticz function
+	def onStop(self):
+		self.__device     = None
+		self.__last_cmd   = None
+		self.__connection.Disconnect()
+		self.__connection = None
 
 global _plugin
 _plugin = BasePlugin()
@@ -166,10 +219,26 @@ def onStart():
 	global _plugin
 	_plugin.onStart()
 
+def onStop():
+	global _plugin
+	_plugin.onStop()
+
+def onConnect(Connection, Status, Description):
+	global _plugin
+	_plugin.onConnect(Connection, Status, Description)
+
+def onMessage(Connection, Data):
+	global _plugin
+	_plugin.onMessage(Connection, Data)
+
 def onCommand(Unit, Command, Level, Hue):
 	global _plugin
 	_plugin.onCommand(Unit, Command, Level, Hue)
 
+def onDisconnect(Connection):
+	global _plugin
+	_plugin.onDisconnect(Connection)
+
 def onHeartbeat():
 	global _plugin
 	_plugin.onHeartbeat()